LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2017 >> X3 sDrive28i >> Repair and Diagnosis >> External Pages >> Different car >> Section 366 (General Electrical System - Repair - E70) >> Plug Connection, Terminal, Power Distribution Box >> 61 13... Opening plug housings and removing contacts of different plug systems >> 61 13... Inline plugs, 4-, 10-pin, System Elo

61 13... Inline plugs, 4-, 10-pin, System Elo

WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Detach fastener (1) from contact carrier (2).

Fig 1: Detaching Fastener From Contact Carrier
G10064048Courtesy of BMW OF NORTH AMERICA, INC.

Hold down retaining hook (3) of defective contact and pull cable and contact up to secondary lock (6).

Fig 2: Holding Down Retaining Hook Of Defective Contact
G10064049Courtesy of BMW OF NORTH AMERICA, INC.

Hold down retaining hook once again in secondary lock and pull cable and contact completely out of contact carrier.

Fig 3: Pulling Cable And Contact Out Of Contact Carrier
G10064050Courtesy of BMW OF NORTH AMERICA, INC.