LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2017 >> X3 sDrive28i >> Repair and Diagnosis >> External Pages >> Different car >> Section 366 (General Electrical System - Repair - E70) >> Plug Connection, Terminal, Power Distribution Box >> 61 13... Opening plug housings and removing contacts of different plug systems >> 61 13... Inline plugs, 2-pin, System MPQ 2.8

61 13... Inline plugs, 2-pin, System MPQ 2.8

WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Press catch on outside in direction of arrow and remove towards top.

Fig 1: Pressing Connector Catch
G10064044Courtesy of BMW OF NORTH AMERICA, INC.

Press down retaining hook (1) with screwdriver and pull out cable and contact (2) towards rear.

Fig 2: Pressing Retaining Hook
G10064045Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals