61 13... In-line connectors, 30-pin, System D2.5

WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

61 0 303

Carefully pull external connector (1) in area of retaining lugs (2) apart slightly.

Fig 1: Pulling Apart External Connector

Courtesy of BMW OF NORTH AMERICA, INC.

Pull internal connector (3) until limit position in direction of arrow.

Fig 2: Pulling Internal Connector Up To Limit Position

Courtesy of BMW OF NORTH AMERICA, INC.

With special tool 61 0 303 press back retaining hook (4) of corresponding contact and pull out cable with contact.

Fig 3: Pressing Retaining Hook Using Special Tool (61 0 303)

Courtesy of BMW OF NORTH AMERICA, INC.