LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2017 >> X3 sDrive28i >> Repair and Diagnosis >> External Pages >> Different car >> Section 366 (General Electrical System - Repair - E70) >> Fanfare Horn >> 61 33 055 Removing and installing/replacing right fanfare horn

61 33 055 Removing and installing/replacing right fanfare horn

WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks: 

NOTE: Work is shown on the E70 (without supplementary radiator) by way of example. There may be differences in detail in the case of other vehicle models.
WARNING: Risk of injury!
Tape off edges (1) of bumper trim.
Fig 1: Applying Tape To Bumper Trim Edges
G06213516Courtesy of BMW OF NORTH AMERICA, INC.

Release nut (1) and pull holder with fanfare horn (2) forwards slightly.

Tightening torque 61 33 4AZ .

Disconnect associated plug connection and remove holder with fanfare horn (2).

Fig 2: Identifying Fanfare Horn Nut
G06213519Courtesy of BMW OF NORTH AMERICA, INC.