61 14... Removing and installing/replacing B+ terminal (engine compartment)

WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

64 1 020

Necessary preliminary tasks:

Disconnect BATTERY NEGATIVE LEAD

Open cover (1).

Release screw (2). Tightening torque 61 12 4AZ .

Feed battery positive lead (3) in direction of arrow out of B+ terminal (5).

Release catch (4) with special tool 64 1 020 .

Detach B+ terminal (5) in direction of arrow from holder (6).

Fig 1: Detaching B Positive Terminal From Holder

Courtesy of BMW OF NORTH AMERICA, INC.

Release screw (1). Tightening torque 61 12 4AZ .

Remove B+ terminal (2) in direction of arrow from battery positive lead (3).

Fig 2: Removing B Positive Terminal From Battery Positive Lead

Courtesy of BMW OF NORTH AMERICA, INC.