61 14 010 Removing and installing/renewing power distribution box (on battery)
WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Observe SAFETY INFORMATIONS for handling vehicle battery.
Follow instructions on INTELLIGENT BATTERY SENSOR (IBS) .
Follow instructions on INTELLIGENT BATTERY SENSOR (IBS) .
Necessary preliminary work:
- Disconnect BATTERY EARTH LEAD
Additionally E70 Security (optional equipment 106):
- Disconnect Security positive battery cable
Disconnect plug connection (1).
Open cover, release nut (3) underneath and disconnect positive battery cable. Tightening torque 61 21 4AZ .
Open cover (5) and release nut (4). Tightening torque 61 21 2AZ .
Using a suitable tool, expand locking bracket (6) at lower end and clip out.
Lift power distribution box (2) out of battery.