LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2017 >> X3 sDrive28i >> Repair and Diagnosis >> External Pages >> Different car >> Section 366 (General Electrical System - Repair - E70) >> Control Units, Modules, Sensors, Antennas >> 61 35 683 Replacing optics for solar rain/light sensor

61 35 683 Replacing optics for solar rain/light sensor

WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DAMAGE (ESD PROTECTION) .

Necessary preliminary tasks: 

Optics can only be replaced in the following equipment specifications: 

Carefully unlock catches (1) of solar rain/light sensor (2).

Remove optical element for solar rain/light sensor (3).

Installation: 

Detach protective cover from new optical element for solar rain/light sensor.

Catches (1) of solar rain/light sensor (2) must not be damaged or missing.

Observe laser marking (4) of fitting aid.

Fig 1: Identifying Solar Rain/Light Sensor, Optical Element, Laser Marking, And Catches
G05478709Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

When fitting a different type of windscreen, carry out CODING  to determine the windscreen type for the light sensor.

Carry out INITIALIZATION  to calibrate the rain sensor to the windscreen.