00 00... Tires: checking and if necessary correcting inflation pressure, checking condition, tread depth and pattern

WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Check tire pressure (also spare/compact spare wheel if present):
- Check tire pressure in accordance with label on B-pillar
- The tire pressure in the spare wheel must be 0.5 bar higher than the maximum specified value on the label
Check tire condition:
- Check tread depth of all tires with tire tread gauge
- Check tire tread surfaces and side walls for incisions and foreign particles such as nails or screws
- Check tread wear pattern for localized flattening and wear on one side; if necessary, carry out wheel/chassis alignment after consulting with customer and issue a separate invoice for this work

NOTE:

Approved wheel and tire combinations
For reasons of driving safety, only use tires of the same design and tire tread on a single vehicle
Inform customer of any incorrect or worn tires