65 77 Airbag Triggering Control
WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - AIRBAG TRIGGERING CONTROL
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Airbag control unit to tunnel middle | E70, E71, E72, E82, E84, E88 | 8 Nm | ||
| E89 | 8.5 Nm | ||||
| 2AZ | Sensor, A-pillar | E70 | 8 Nm | ||
| 3AZ | Sensor, B-pillar | E70, E71, E72, E82, E84, E88, E89 | 8 Nm | ||
| 4AZ | Sensor, front door, to inner door panel | E70, E71, E72, E82, E84, E88, E89 | 8 Nm | ||
| 5AZ | Sensor, rear seat, to seat frame | E70 | 8 Nm | ||
| 6AZ | Acceleration sensor to front carrier support | E70, E71, E72, E82, E84, E88, E89 | Replace screws | 8 Nm | |
| 7AZ | Holder, rollover controller to rollover protection | E88 | 4.5 Nm | ||
| 8AZ | Rollover controller to holder | E88 | 5 Nm | ||