52 10 Front Seats
WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - FRONT SEATS
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Seat to floor panel | E70/E71/E72 | (trilobular) | Replace Powerlok screw | 43 Nm |
| 2AZ | Backrest frame to seat frame | E70/E71/E72 | (trilobular) | Replace Powerlok screw | 31 Nm |
| 3AZ | Active head restraint - Sliding rails with gas cartridge | E70/E71/E72 | 8 Nm | ||
| 4AZ | Carrier section for electr. operating unit | E70/E71/E72 | 8 Nm | ||
| 5AZ | Cover to seat | E70/E71/E72 | 4 Nm | ||
| 6AZ | Seat rails to seat frame | E70/E71/E72 | 27 ±3 Nm | ||
| 7AZ | Adjusting switch to cover | E70/E71/E72 | 2 Nm | ||
| 8AZ | Seat angle adjuster to seat mechanism | E70/E71/E72 | M8x30 | 27 ± 3 Nm | |
| 9AZ | Seat depth adjustment | E70/E71/E72 | 3.0 + 0.5 Nm | ||
| 10AZ | Transmission for backrest upper section adjustment | E70/E71/E72 | 2.5 + 0.5 Nm | ||
| 11AZ | Retaining screw on head restraint | E70/E71/E72 | 4.0 ± 0.2 Nm | ||