51 71 Gaskets and loose body components
WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - GASKETS AND LOOSE BODY COMPONENTS
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Rear spoiler | E70 | Screw | 2 Nm | |
| Nut | 7 Nm | ||||
| 2AZ | Trailing link in engine compartment | E70, E71, E72 | Replace screws | ||
| Jointing torque | 19 Nm | ||||
| Angle of rotation | 90 ° | ||||
| 3AZ | Diagonal strut to bumper carrier | E70, E71, E72 | 18 Nm | ||
| 4AZ | Cross-strut to body | E70, E71, E72 | Replace screws | ||
| Jointing torque | 10 Nm | ||||
| Angle of rotation | 90 ° | ||||
| 5AZ | Lashing rail to body | E70, E71, E72 | 20 Nm | ||
| 6AZ | Support piece, sill to body | E70, E71, E72 | M8 | 10 Nm | |
| 7AZ | APM bracket to cross-strut | E72 | 11 Nm | ||
| 8AZ | Intake pipe bracket to cross-strut | E72 | 11 Nm | ||