34 51 Slip control system (DSC)
WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - SLIP CONTROL SYSTEM (DSC)
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Control unit to hydraulic control unit | E70, E71, E72 | Initial tightening Final tightening |
2 ± 0.5 Nm4.3+ 0.5 Nm | |
| 2AZ | DSC sensor to floor pan | E70, E71, E72 | 8 Nm | ||
| 3AZ | Pulse sensor to swivel bearing/wheel carrier | E70, E71, E72 | 8 Nm | ||
| 4AZ | Hydraulic control unit to holder | E70, E71, E72 | M8 | 19 Nm | |
| 5AZ | Holder, hydraulic control unit, to body | E70, E71, E72 | 8 Nm | ||
| 6AZ | ICM control unit to body | E71, E72 | 8 Nm | ||