33 11 Rear Differential Case With Cover
WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - REAR DIFFERENTIAL CASE WITH COVER
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Case Covers | E70 | M10 10.9 | 188L 188LW | 55 Nm |
| E70 | M10 10.9 | 215L 215LW | 90 Nm | ||
| 2AZ | Oil filler plug with O-ring | E70 | M22 | Replace oil filler plug with O-ring | 60 Nm |
| 3AZ | Oil filler and drain plugs with O-ring | E71, E71M/E70 M | M22 | 225QMV Replace oil filler and drain plugs with O-ring | 50 Nm |
| 4AZ | Heat shield to rear differential | E71 | M6 | 8 Nm | |
| 5AZ | Servomotor to rear differential | E71, E71M/E70M | M6 | 8 Nm | |
| 6AZ | Temperature sensor to rear differential | E71, E71M/E70M | M12 | 14 Nm | |
| 7AZ | Control unit to body | E71, E71M/E70M | Plastic nut | 3 Nm | |
| 8AZ | Super positioning unit to rear axle final drive (incl. special screw on M models) | E71 | M8 | 28 Nm | |
| 9AZ | Air guide to special screw | E71M | M6 | 8 Nm | |