31 60 Output Shaft
WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - OUTPUT SHAFT
| |
Type |
Thread |
Tightening specification |
Measure |
| 1AZ |
Output shaft console to engine oil sump |
E70, E70M/E71, E71M/E72, |
M8 |
|
19 Nm |
| 2AZ |
Output shaft to wheel bearing |
E70, E70M/E71, E71M/E72, |
M27 |
Replace collar nut, lightly oil contact surface |
420 Nm |