24 00 Transmission in general
WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - TRANSMISSION IN GENERAL
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Transmission to engine | ||||
| Torx bolts | GA6HP19Z/GA6HP26Z/GA8HP45Z/GA8HP70Z/GA8HP90Z | M6 | 9 Nm | ||
| Torx bolts | GA6HP19Z/GA6HP26Z/GA8HP45Z/GA8HP70Z/GA8HP90Z | M10 | 38 Nm | ||
| GA8HP45Z/GA8P75H | M10x10.9 | 56 Nm | |||
| Steel Torx screws | GA6HP19Z/GA6HP26Z/GA8HP45Z/GA8HP50/GA8HP70Z/GA8HP90Z/GA8P70H | M8 | 19 Nm | ||
| GA8HP70Z (N63) | M8 | 21 Nm | |||
| Steel Torx screws | GA6HP19Z/GA6HP26Z/GA8HP45Z/GA8HP50/GA8HP70Z/GA8HP90Z/GA8P70H | M12 | 66 Nm | ||
| 2AZ | Transmission to engine N52/N53/N54/N55 Aluminum screws/bolts are not magnetic |
GA6HP19Z/GA6HP26Z/GA8HP45Z | Replace screws Jointing torque and angle of rotation must be observed without fail | ||
| GA6HP19Z | M10x30 | Jointing torque | 20 Nm | ||
| Angle of rotation | 90-110 ° | ||||
| GA6HP19Z | M10x85 | Jointing torque | 20 Nm | ||
| Angle of rotation | 180-200 ° | ||||
| GA6HP19Z/GA8HP45Z | M12 | Jointing torque | 25 Nm | ||
| Angle of rotation | 130 ° | ||||
| 3AZ | Cover plate for transmission | GA6HP19Z/GA8HP45Z | M6 | 9 Nm | |