24 11 Transmission housing, transmission oil sump
WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - TRANSMISSION HOUSING, TRANSMISSION OIL SUMP
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Transmission oil sump | GA6HP19Z/GA6HP26Z/GA6HP32Z | M6 | 10 Nm | |
| 2AZ | Oil drain plug | GA6HP19Z/GA6HP26Z/GA6HP32Z/GA8HP45Z/GA8HP50/GA8HP70Z/GA8P70H/GA8P75H | M16x1.5 M24x1 M18x1 | Plastic oil sump | 8 Nm |
| 3AZ | Oil filler plug | GA6HP26Z/GA6HP32Z | M30x1.5 | 80 Nm | |
| GA6HP19Z/GA6HP26Z/GA6HP32Z/GA8HP45Z/GA8HP50/GA8HP70Z/GA8P70H/GA8HP90Z/GA8P75H | M18x1.5 | 35 Nm | |||
| 4AZ | Transmission oil sump | GA8HP45Z/GA8HP50/GA8HP70Z/GA8P70H/GA8HP90Z/GA8P75H | M6 | Replace aluminum screws; jointing torque and angle of rotation must be observed without fail. | |
| 1. Jointing torque | 4 Nm | ||||
| 2. Angle of rotation | 45 ° | ||||
| Steel screws | 10 Nm | ||||
| 5AZ | Oil drain plug | GA8HP90Z | M10 | 12 Nm | |
| 6AZ | Heat shield on gearbox | GA8HP45Z/GA8P70Z/GA8P75H | M8 | 19 Nm | |
| GA8HP45Z | M6 | 8 Nm | |||
| 7AZ | Ground strap to body and transmission | GA8HP45Z/GA8HP50/GA8HP70Z/GA8P70H/GA8P75H | M8 | 19 Nm | |