22 11 Engine mounting
WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - ENGINE MOUNTING
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Engine mount to front axle support | E52/E85/E86 | 42 Nm | ||
| E65/E66/E67 | M8-8 | 19 Nm | |||
| E60/E61/E63/E64/E83 | M8-8 | 21 Nm | |||
| E53 | M8-10.9 | 30 Nm | |||
| E87/E90/E91/E92/E93/E70/E71/E83/E81/E82/E88/E89/E84 | M8 10.9 | 28 Nm | |||
| E70/E71/E72/E83/E84/E90/E91/E92/E93 | M10 | 38 Nm | |||
| E92/E90/S65 | M10 | 56 Nm | |||
| 2AZ | Engine mount to engine support arm | E60/E61/E63/E64/E65/E66/E67/E53/E83/E87/E90/E91/E92/E93/E70/E71/E81/E82/E88/E89/E84 | M10 10.9 | 56 Nm | |
| E65/E66/E67 | M12 10.9 | 100 Nm | |||
| E70/E71/E72/E83/E84/E90/E91/E92/E93 | M12 | 68 Nm | |||
| E85/E86/E52 | 42 Nm | ||||
| 3AZ | Engine support arm to engine | E60/E61/E63/E64/E65/E66/E67/E70/E71/E72/E81/E82/E83/E84/E87/E88/E89/E90/E91/E92/E93 | M10 8.8 | 38 Nm | |
| N51/N52/N52K/N53 | M12 | Aluminum bolts must be replaced | |||
| 1. Jointing torque | 25 Nm | ||||
| 2. Angle of rotation | 105 ° | ||||
| E60/E61/E65/E66/E67 | M8 8.8 | 19 Nm | |||
| E85/E83 | M8 8.8 | 21 Nm | |||
| E70/E71 | M10 10.9 | 56 Nm | |||
| E53 (N62/M54) | 38 Nm | ||||
| E53 (M57) | 65 Nm | ||||
| N54/N55 | M12 | Engine N54/55 only | 66 Nm | ||
| N42 | M10 8.8 | 38 Nm | |||
| 4AZ | Engine mount to console | E65/E60/E61/E63/E64 | M8 8.8 | 21 Nm | |
| 5AZ | Console to front axle support | E65/E60/E61/E63/E64 | M8-8 | 21 Nm | |
| 6AZ | Vibration absorber to engine support | E70/E71 | 19 Nm | ||
| 7AZ | Reinforcement plate to front axle support | E90/E91/E92 | M8 | 19 Nm | |
| 8AZ | Support angle to engine mount or front axle support | E90/E91/E92 | M8 | 19 Nm | |