18 20 Mounting, exhaust system (M57T2/Top)
WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - MOUNTING, EXHAUST SYSTEM (M57T2/TOP)
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Diesel particulate filter to crankcase | M8x20 | 21 Nm | ||
| 2AZ | Strut, top, to diesel particulate filter | M8x20 | 21 Nm | ||
| 3AZ | Lower holder to diesel particulate filter | M8x20 | 21 Nm | ||
| 4AZ | Exhaust system to transmission mounting | M8x20 | 21 Nm | ||
| 5AZ | Bracket to transfer case | M8x20 | 21 Nm | ||
| 6AZ | Holder to rear axle final drive | M12 nut | 35 Nm | ||
| M8x15 | 21 Nm | ||||
| 7AZ | Connection, rear muffler, to body, rear | M8x20 | 21 Nm | ||
| M8 Mutter | 21 Nm | ||||
| 8AZ | clamp | M57T2/M57T2 TOP | 55 Nm | ||
| 9AZ | Clamp | M57T2/M57T2 TOP | 45 Nm | ||