18 32 Catalytic exhaust-gas converter
WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - CATALYTIC EXHAUST-GAS CONVERTER
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Catalytic converter to exhaust turbocharger | N63/N63 Hybrid/S63 | V-clamp | Replace V-band clamp | 13 Nm |
| 2AZ | Catalytic exhaust-gas converter, holder, inlet funnel, to cylinder head | N63/N63 Hybrid/S63 | M8 | 21 Nm | |
| 3AZ | Catalytic exhaust-gas converter to cylinder head | N63/N63 Hybrid/S63 | M8 | 21 Nm | |
| 4AZ | Catalytic exhaust-gas converter to bracket | N63/N63 Hybrid/S63 | M8 | 21 Nm | |
| 5AZ | Bracket for high-voltage cables | N63 Hybrid | M6 | 8 Nm | |