17 22 Engine oil cooler and lines
WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - ENGINE OIL COOLER AND LINES
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Transmission oil cooler line to transmission oil cooler | N62TU/N52K/M57T2 | M6 x 35 | 8 Nm | |
| 2AZ | Transmission oil cooler to front axle carrier | N62TU/N52K/M57T2 | M6 x 35 | 8 Nm | |
| 3AZ | Transmission oil cooler line holder to transmission bell housing | N62TU/N52K/M57T2 | M6 x 30 | 8 Nm | |
| 4AZ | Engine oil cooler line to engine oil cooler | N62TU/M57T2 | M6 x 35 | 8 Nm | |
| 5AZ | Engine oil cooler to side panel module | N62TU/M57T2 | M6 x 35 | 8 Nm | |
| 6AZ | Holder, engine oil cooler lines, to timing case cover | N62TU/M57T2 | M6 x 15 | 8 Nm | |
| 7AZ | Engine oil cooler line to holder | N62TU/M57T2 | M6 x 30 | 8 Nm | |
| 8AZ | Engine oil cooler lines to control valve | N62TU/M57T2 | M8 x 35 | 19 Nm | |