13 62 650 Replacing camshaft pulse generator (M57, M57TU, M57T2)

WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Read out fault memory of DDE control unit; if necessary, work through test schedules
Switch off ignition
Remove acoustic cover. See 13..... REMOVE THE ACOUSTIC COVERS (M57T2 WITH AND WITHOUT SCR) .

Unlock plug (1) and remove.

Release screw.

Tightening torque: 13 62 8AZ .

Remove pulse generator.

Fig 1: Locating Pulse Generator Plug

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Check sealing ring (1) for damage and replace if necessary.

Fig 2: Identifying Sealing Ring

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Now clear the fault memory.