13 62 Sensors for control unit
WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - SENSORS FOR CONTROL UNIT
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Coolant temperature sensor | N54/N54T/N55 | M12x1.5 | 13.5 Nm | |
| 2AZ | Suction pressure sensor/fuel differential-pressure sensor | N54/N54T/N55 | K50x18 | 3.5 Nm | |
| 3AZ | Camshaft sensor to cylinder head | N54/N54T/N55 | M6x16 | 8 Nm | |
| 4AZ | Crankshaft sensor to crankcase | N54/N54T | M6x16 | 8 Nm | |
| 5AZ | Knock sensor to crankcase | N54/N54T/N55 | M8x30 | 21.5 Nm | |
| 6AZ | Connector housing, crankshaft sensor, to crankcase | N55 | M6 | 8 Nm | |
| 7AZ | Crankshaft sensor to crankcase | N55 | 5 Nm | ||
| 8AZ | Oil temperature sensor to engine block | N55 | 5 Nm | ||