13 62 Senders for Control Unit
WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - SENDERS FOR CONTROL UNIT
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Temperature time switch | M21/M51 | 18 Nm | ||
| 2AZ | Temperature sensor, water | M60/1/M60/2/M21/M51 | 18 Nm | ||
| all others | 13 Nm | ||||
| 3AZ | Temperature switch | All | 28 Nm | ||
| 4AZ | Temperature sensor, air | All | 13 Nm | ||
| 5AZ | Charge-air pressure sensor to bracket | M51/M41 | 4 Nm | ||
| Charge-air pressure sensor to intake manifold | M47 | 5 Nm | |||
| 6AZ | Dual temperature sensor (4-pin plug connection) |
M41/M43/M44/S50/S52/M52/M57/M67/M62/M73 | 13 Nm | ||
| 7AZ | Air-mass sensor on lower section of intake filter housing | M51 | 3.5 Nm | ||
| Air-mass flow sensor to cylinder head cover | M47/M47TU/M57/M57TU/M57T2 | 4.5 Nm | |||
| 8AZ | Pulse generator, camshaft to cylinder head cover | M57 | 4.5 Nm | ||
| M47TU/M57TU | 3.5 Nm | ||||
| M57T2 | 2.3 Nm | ||||
| 9AZ | Intake neck on air-mass flow sensor | M47 | 9 Nm | ||
| 10AZ | Exhaust-gas temperature sensor | M47T2/M57T2 | 30 Nm | ||