13 71 Intake silencer
WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - INTAKE SILENCER
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Raw air diversion to lock support | N55 | 6 Nm | ||
| 2AZ | Intake silencer upper part to lower part | N55 | 2.5 Nm | ||
| 3AZ | Clean air pipe to intake silencer | N55 | Clamp | 3 Nm | |
| 4AZ | Hot film air mass meter to upper clean air pipe | N55 | 2 Nm | ||
| 5AZ | Clean-air duct to cylinder head cover | N55 | 3 Nm | ||
| 6AZ | Upper clean air pipe to lower clean air pipe | N55 | Clamp | 3 Nm | |
| 7AZ | Lower clean air pipe to air duct | N55 | 3 Nm | ||
| 8AZ | Air duct to turbocharger | N55 | 8 Nm | ||
| 9AZ | Lower air duct to cylinder head | N55 | 8 Nm | ||
| 10AZ | Lower charge-air duct to upper charge-air duct | N55 | 3 Nm | ||