13 51 Injection pump, control
WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - INJECTION PUMP, CONTROL
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | High-pressure pump to cylinder head cover | N63/N63 Hybrid/S63 | M6 | Replace screws. Tighten bolts to final torque/angle in uniform increments of 90°. Follow repair instruction . See 13 51 065 REMOVING AND INSTALLING/REPLACING LEFT HIGH PRESSURE PUMP (N63) or 13 51 070 REMOVING AND INSTALLING/REPLACING RIGHT HIGH PRESSURE PUMP (N63) ! |
12 Nm |