13 71 Air intake system
WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - AIR INTAKE SYSTEM
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Clean-air pipe to turbocharger | N63/N63 Hybrid/S63 | M6 | 10 Nm | |
| 2AZ | Intake filter housing to clean-air pipe | N63/N63 Hybrid | Hose clamp | 3 Nm | |
| 3AZ | Carrier plate, cylinder 1-4 to cylinder head cover | N63/N63 Hybrid | M6 | 10 Nm | |
| 4AZ | Carrier plate, cylinder 5-8 to cylinder head cover | N63/N63 Hybrid | M6 | 10 Nm | |
| 5AZ | Carrier plate for acoustic cover | N63/N63 Hybrid | M6 Snaploc bolt | 10 Nm | |
| 6AZ | Intercooler to engine | N63/N63 Hybrid/S63 | M6 | 10 Nm | |
| 7AZ | Hose to throttle valve | N63/N63 Hybrid | Screw clamp | 4 Nm | |
| 8AZ | Hose to turbocharger | N63/N63 Hybrid | Screw clamp | 3.5 Nm | |
| 9AZ | Vacuum reservoir to bracket. | S63 | M6 | 10 Nm | |
| 10AZ | A/C lines bracket | S63 | M6 | 10 Nm | |
| 11AZ | Intake filter housing upper section to intake filter housing lower section | N63/N63 Hybrid/S63 | 3.5 Nm | ||
| 12AZ | Intake filter housing to clean-air pipe | S63 | Screw clamp | 3 Nm | |
| 13AZ | Air duct to bracket | S63 | M6 | 10 Nm | |