11 37 Variable valve gear
WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - VARIABLE VALVE GEAR
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Slide block to cylinder head. | N55 | M6x23 | 10 Nm | |
| 2AZ | Torsion spring (throttle return spring) to cylinder head. | N55 | M6x20 | 10 Nm | |
| 3AZ | Electrical servomotor to cylinder head. | N55 | M6x16 | 10 Nm | |
| 4AZ | Oil spray nozzle to guide block. | N55 | M6x30 | 10 Nm | |
| 5AZ | Stop screw of eccentric shaft to cylinder head. | N55 | M6 | 10 Nm | |
| 6AZ | Valvetronic sensor to holder. | N55 | M6x20 | 8 Nm | |
| 7AZ | Holder for valvetronic sensor. | N55 | M6x20 | 8 Nm | |