11 65 Turbocharger and Control
WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - TURBOCHARGER AND CONTROL
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Exhaust manifold to turbocharger (D80 V-band clamp). | N63 | M8 | Replace V-band clamp | 13 Nm |
| 2AZ | Turbocharger to primary catalyst (D108 V-band clamp). | N63 | M8 | Replace V-band clamp | 13 Nm |
| 3AZ | Heat protection plate | N63 | M6 x 12 | 10 Nm | |
| 4AZ | Heat shield to crankcase, oil return cover or cylinder head. | N63 | M6 x 14 | 10 Nm | |
| 5AZ | Heat shield to crankcase. | N63 | M6 x 22 | 10 Nm | |
| 6AZ | Vacuum reservoir to crankcase and cylinder head. | N63 | M6 x 14 | 10 Nm | |
| 7AZ | Bracket, electropneumatic pressure converter, to cylinder head. | N63 | M6 x 18 | 10 Nm | |
| 8AZ | Hexagon nut (2 x) Electropneumatic pressure converter to bracket. | N63 | BM6 | 10 Nm | |
| 9AZ | Blow-off valve to exhaust turbocharger | N63 | M6 | 9 Nm | |