11 00 Standard screw connection
WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - STANDARD SCREW CONNECTION
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Screws and nuts | M5 | 5 Nm ± 0.5 | ||
| 2AZ | Screws and nuts | M6 | 8 Nm ±±1 | ||
| 3AZ | Screws and nuts | M7 | 13 Nm±2 | ||
| 4AZ | Screws and nuts | M8 | 19 Nm±3 | ||
| 5AZ | Screws and nuts | M10 | 38 Nm±5 | ||
| 6AZ | Hose clamp, WAF 5 | 1.0 to 1.5 Nm | |||
| 7AZ | Hose clamp, WAF 6 | 2.5 up to 3.5 Nm | |||