11 13 Oil sump (M57/TOP2/SCR)
WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - OIL SUMP M57/TOP2 (SCR)
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Oil drain to oil sump. | M57TOP2 | M12 x 1.5 | Replace sealing ring. | 25 Nm |
| 2AZ | Oil sump to engine block. | M57TOP2 | M6 | 8 Nm | |
| 3AZ | Oil sump to engine block. | M57TOP2 | M8 x 30 | 19 Nm | |
| 4AZ | Guide tube, oil dipstick to intake plenum/oil sump. | M57TOP2 | M6 x 14 | 8 Nm | |
| 5AZ | Transmission to oil sump. | M57TOP2 | M8 x 50 | 19 Nm | |
| 6AZ | Holder, transmission oil cooler line, to oil sump. | M57TOP2 | M6 | Collar nut | 8 Nm |
| 7AZ | Bearing support to oil sump. | M57TOP2 | M8 x 28 | 19 Nm | |
| 8AZ | Oil level sensor to oil sump. | M57TOP2 | M6 | 8 Nm | |