11 41 Oil Pump with Strainer and Drive
WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - OIL PUMP WITH STRAINER AND DRIVE
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Intake manifold to oil pump | N63 | M6 | 10 Nm | |
| 2AZ | Oil pump to bearing cap | N63 | M8 | 24 Nm | |
| 3AZ | Oil pump cover to housing | N63 | M6 | 10 Nm | |
| 4AZ | Sprocket to oil pump | N63 | M10 | Important - left-hand thread | |
| 1. Jointing torque | 20 Nm | ||||
| 2. Angle of rotation | 40 ° | ||||
| 5AZ | Oil pump sprocket to hub | N63 | M6 | 10 Nm | |
| 6AZ | Oil deflector to oil pump | N63 | M6 | 10 Nm | |