11 62 Exhaust manifold
WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - EXHAUST MANIFOLD
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Exhaust manifold to cylinder head Coat screw connections with CRC copper paste |
All | M6 | Replace nuts | 10 Nm |
| M50/M52/M52TU/M54/M56/S52/S50 US | M7 | Replace nuts | 20 Nm | ||
| All/others | M7 | Replace nuts | 15 Nm | ||
| M10 | M8 | Upper row of stay bolts installed with bolt cement | |||
| 23 Nm | |||||
| M21 | M8 | 12 Nm | |||
| Replace nuts Retighten after 2000 km Slacken nuts by a 1/4 turn |
|||||
| 12 Nm | |||||
| M41/M47/M47TU/M51/M57/M57TU | M8 | Replace nuts | 20 Nm | ||
| All/others | M8 | Replace nuts | 23 Nm | ||