11 11 Engine block (SCR)
WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - ENGINE BLOCK (SCR)
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Bearing cap to engine block | M57T2/Top | M10x 85 12.9 | Replace bolts | |
| 1. Jointing torque | 25 Nm | ||||
| 2. Jointing torque | 50 Nm | ||||
| 3. Angle of rotation | 60 ° | ||||
| 4. Angle of rotation | 60 ° | ||||
| 5. Loosen all bolts at least 180°, proceeding from outside inward | |||||
| 6. Jointing torque | 25 Nm | ||||
| 7. Jointing torque | 50 Nm | ||||
| 8. Angle of rotation | 60 ° | ||||
| 9. Angle of rotation | 60 ° | ||||
| 2AZ | Coolant drain plug on engine block. | M57T2/Top | M14x1.5 | Replace sealing ring | 25 Nm |
| 3AZ | Tensioning and guide rail on engine block | M57T2/Top | M10 | 22 Nm | |
| 4AZ | Guide rail to cylinder head | M57T2/Top | M10 | 22 Nm | |