11 24 Connecting Rods and Bearings
WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - CONNECTING RODS AND BEARINGS
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Connecting rod bolts | M10/M30 | Replace, wash and oil screws | 55 Nm | |
| M20/M21/M40/M41/M42/M43/M43TU/M44/M47/M47TU/M50/M51/M52/M52TU/M54/M56/M57/M57TU/S52/S50 US/M70/S70/M73/N40/N42/N45/N46/N62/N73/N62S/N62TU | Replace, wash and oil screws | ||||
| Application torque | 5 Nm | ||||
| Jointing torque | 20 Nm | ||||
| Torque angle | 70 ° | ||||
| M60/M62 | Replace, wash and oil screws | ||||
| Application torque | 5 Nm | ||||
| Jointing torque | 20 Nm | ||||
| Torque angle | 80 ° | ||||
| M67 | Replace screws, do not wash off screw coating | ||||
| Application torque | 5 Nm | ||||
| Jointing torque | 20 Nm | ||||
| Torque angle | 85 ° | ||||