11 14 Case Covers
WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - CASE COVERS
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Jump guard to crankcase | N63 | M6 | 10 Nm | |
| 2AZ | Gear case cover to crankcase, bottom | N63 | M8 | 21 Nm | |
| 3AZ | Gear case cover to cylinder head, top | N63 | M6 | 10 Nm | |
| 4AZ | End cover (oil) to crankcase (transmission side) | N63 | M6 | Observe tightening sequence (liquid sealing compound required) | 10 Nm |
| 5AZ | End cover (water) to crankcase (transmission side) | N63 | M6 | Observe tightening sequence (liquid sealing compound required) | 10 Nm |