11 31 Camshaft
WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - CAMSHAFT
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Tensioning rail and guide rail, cyl. 1 to 4, to crankcase | N63 | M10x1.25 | Renew screws Insert screws dry |
46 Nm |
| 2AZ | Tensioning rail and guide rail, cyl. 5 to 8, to crankcase | N63 | M8x1.25 | Renew screws Insert screws dry |
20 Nm |
| 3AZ | Guide rail to cylinder head | N63 | M14x1.5 | Replace sealing ring | 25 Nm |
| 4AZ | Slide rail to cylinder head | N63 | M7 | 15 Nm | |
| 5AZ | Chain tensioner to cylinder head | N63 | M7 | 13 Nm | |
| 6AZ | Camshaft bearing cap to cylinder head | N63 | M7 | 15 Nm | |
| 7AZ | Camshaft step bearing cap to cylinder head | N63 | M7 | 15 Nm | |