11 31 Camshaft (SCR)
WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - CAMSHAFT (SCR)
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Camshaft sprocket to gear on intake camshaft | M57T2/TOP | M7x19 | 14 Nm | |
| 2AZ | Tensioning rail, camshaft high pressure pump to cylinder head | M57T2/TOP | Bearing pin | Replace screw | 20 Nm |
| 3AZ | Guide rail, camshaft high-pressure pump to cylinder head | M57T2/TOP | Bearing pin | Replace screw | 20 Nm |
| 4AZ | Camshaft bearing cap to cylinder head | M57T2/TOP | M6x30 | 8 Nm | |