0492113 331350 Device AM

WARNING: This page is about a different car, the 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: For removing and installing outer rings of taper roller bearings

Consisting of:

1 = 0492114 Shaped part
NOTE: (Shaped part)
2 = 0492115 Spindle
NOTE: (Spindle, short)

Fig 1: Identifying Device (0492113)
Courtesy of BMW OF NORTH AMERICA, INC.
4 = 0492116 Nut
5 = 0492117 Washer
NOTE: (Installation washer (2 pieces))
6 = 0492118 Bridge
NOTE: (Support bridge)
7 = 0492119 Washer
NOTE: (Thrust washer)
8 = 0492120 Holding sleeve
NOTE: (Pressure sleeve) Can no longer be ordered separately. Only available as part of set 11 5 330 = 83 30 0 495 127.