Storage Location

WARNING: This page is about a different car, the 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Extractor (0492096)

Courtesy of BMW OF NORTH AMERICA, INC.

Consisting of:

1 = 0492097 Connector
NOTE: (Basic body) For transmissions S5D 260Z, S5D 310Z and S5D 320Z; Discontinued, only available via complete tool
2 = 0492098 Washer
NOTE: (Disc) Replaced by 33 1 311. (0 492 107)
3 = 0492099 Washer
NOTE: (Disc) Replaced by 33 1 311. (0 492 107)
4 = 0492100 Washer
NOTE: (Disc) Replaced by 33 1 311. (0 492 107)
5 = 0492101 Synchronizing key
NOTE: (Thrust piece (old)) Discontinued, only available via complete tool
6 = 0492102 Synchronizing key
7 = 0492103 Synchronizing key
NOTE: Not available individually. Only via complete tool set
8 = 0492104 Synchronizing key
9 = 0492105 Synchronizing key
NOTE: For rear axle differential and for installing the camshaft sprocket on the crankshaft (M70) Discontinued, only available via complete tool
1 = 0492107 Washer
NOTE: (Disc) Discontinued, only available via complete tool
2 = 0492108 Synchronizing key
NOTE: For pulling the bearing inner race off the drive flange - Series: E36/5 Discontinued, only available via complete tool