LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2017 >> X3 sDrive28i >> Repair and Diagnosis >> External Pages >> Different car >> Section 300 (Engine - Special Tools) >> Engine >> 0490805 Puller >> 0490805 112010 Puller AM >> Storage Location

Storage Location

WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

C11

Consisting of:

  1. 0490806  Claw
    Fig 1: Identifying Puller (0490805)
    G09969453Courtesy of BMW OF NORTH AMERICA, INC.
    NOTE: (Remover claw I) With threaded bush - engine: except M60, M62. Can no longer be ordered separately. Only available as part of set 11 2 010 = 83 30 0 490 805.
  2. 0490807  Claw
    NOTE: (Remover claw II) engine: except M60, M62. Can no longer be ordered separately. Only available as part of set 11 2 010 = 83 30 0 490 805.
  3. 0490808  Spindle
    NOTE: (Pressure spindle) Engine: except M60, M62. Can no longer be ordered separately. Only available as part of set 11 2 010 = 83 30 0 490 805.
  4. 0490809  Holding sleeve
    NOTE: Engine: except M60, M62. Can no longer be ordered separately. Only available as part of set 11 2 010 = 83 30 0 490 805.
  5. 0490810  Bush
    NOTE: (Threaded bush) Engine: except M60, M62. Can no longer be ordered separately. Only available as part of set 11 2 010 = 83 30 0 490 805.
  6. 0490811  Spindle
    NOTE: (Pressure spindle) Engine: M60/B30, M62, S62. Can no longer be ordered separately. Only available as part of set 11 2 010 = 83 30 0 490 805.