SI number

WARNING: This page is about a different car, the 2013 BMW X5, 2012 BMW X5, and 2011 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

01 02 87 (721)

Consisting of:

0493383 Puller
NOTE: Only available as part of complete tool set 11 1 210 (83 30 0 490 725).
0493384 Synchronizing key
NOTE: For inserting in the crankshaft when pulling the radial shaft seal out of the gear case cover/engine: M57 Only available as part of complete tool set 11 1 210 (83 30 0 490 725).

Fig 1: Identifying Puller (0490725)
Courtesy of BMW OF NORTH AMERICA, INC.