13 62 Sensors for control unit
WARNING: This page is about a different variant/trim than selected.
13 62 SENSORS FOR CONTROL UNIT - TIGHTENING TORQUES SPECIFICATION
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Camshaft sensor to cylinder head | B38/B48/B46 | TS5x20 | 4 Nm | |
| 2AZ Crankshaft sensor to crankcase | B38/B48/B46 | 4.6 Nm | ||
| 3AZ Knock sensor to crankcase | B38/B48/B46 | M8x30 | 21.5 Nm | |
| 4AZ Charging pressure sensor | B38/B48/B46 | 4 Nm | ||
| 5AZ Coolant temperature sensor, coolant | B38/B48/B46 | M12x1.5 | 13.5 Nm | |
| 6AZ Hot film air mass meter | B38/B48/B46 | TS4x16 | 1.5 Nm | |
| 7AZ Differential pressure sensor for the gasoline particulate filter on holder | B38/B48/B46 | TS4x16 | 1.5 Nm |