13 51 High pressure pump
WARNING: This page is about a different variant/trim than selected.
13 51 HIGH PRESSURE PUMP - TIGHTENING TORQUES SPECIFICATION
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ High-pressure pump to cylinder head | B38/B48/B46 | M6 | Tighten bolts to final torque either way in increments of 90°. Follow repair instruction! |
12 Nm |
| Fuel delivery line to cylinder head cover | ||
| M6 x 18 | tightening torque | 7 Nm |