00 02 000 Raising vehicle with trolley jack
WARNING: This page is about a different variant/trim than selected.
Observe the following trolley-jack-related notes:
- Only trolley jacks sold or approved by BMW, with a rubber plate on their mounting, may be used!
- Trolley jacks must be regularly serviced and always checked for functional reliability before they are used!
- Check the rubber plate on the trolley jack prior to each use, replacing if necessary.
WARNING:
The vehicle may be raised with a trolley jack only
at the following mounting point!
- Center of front axle supportNOTE: Risk of damage!
Align the rubber plate on the trolley jack with the front axle support so as to prevent contact with and therefore damage to the underbody protection. - Rear axle final driveNOTE: Risk of damage!
Align the rubber plate on the trolley jack with the rear axle differential to prevent contact with and damage to the cover (3).