00 00 622 Service - spark plugs

WARNING: This page is about a different variant/trim than selected.

Replace the SPARK PLUGS

CAUTION: For vehicles with B48A20T1 engine, a CBS reset of spark plug should be carried out after the spark plug has been replaced, although this is not indicated in the instrument cluster.

This CBS reset of spark plug can be carried out only with the diagnosis tester.

Either through the CBS reset:

Connect diagnosis tester
- Service functions
- Maintenance and pre-delivery check
- Reset CBS Condition Based Service
- CBS reset of spark plug

CAUTION: Or else by the combination of writing the service history and the CBS reset:

Connect diagnosis tester
- Service functions
- Maintenance and pre-delivery check
- Service history and CBS reset
- CBS reset of spark plug