12 52 Plug Connectors, Terminals
WARNING: This page is about a different variant/trim than selected.
12 52 PLUG CONNECTORS, TERMINALS - TIGHTENING TORQUES SPECIFICATION
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Cable (terminal 50) to starter | B37/B38/B46/B47/B48 | M6 | 7.1 Nm | |
| 2AZ Positive battery cable to alternator | B37/B38/B46/B47/B48 | M8 | 19 Nm | |
| 3AZ Battery positive lead to starter | B37/B38/B46/B47/B48 | M8 | 13.4 Nm | |
| 4AZ Positive battery cable holder on oil pan | B37/B38/B46/B47/B48 | M6 | 8 Nm | |
| 5AZ Battery terminal clamp with IBS positive battery terminal/negative battery terminal | F45/F46/F48/F49/F52/F39 | M6 | 5 Nm | |
| 6AZ Positive battery cable to battery terminal | F45/F46/F48/F49/F52/F39 | M8 | 15.2 Nm |
| Cable bracket on rear cylinder head/transmission | |
| M6 x 20 | 8 Nm |
| Cable duct to cylinder head, rear | |
| M6x16 | 8 Nm |
| Grounding cable on cylinder head | |
| M6 x 16 | 8 Nm |