1710 Radiator, expansion tank (B37, B38, B46, B47, B48)
WARNING: This page is about a different variant/trim than selected.
1710 RADIATOR, EXPANSION TANK (B37, B38, B46, B47, B48) TIGHTENING TORQUES SPECIFICATION
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Fan cowl on radiator | B37/B38/B46/B47/B48 | 8 Nm | ||
| 2AZ Radiator to charge air cooler | B37/B38/B46/B47/B48 | 8 Nm | ||
| 3AZ Expansion tank to body | B37/B38/B46/B47/B48 | M6x20 | 9 Nm | |
| 4AZ Lid to expansion tank | B37/B38/B46/B47/B48 | 6 Nm | ||
| 5AZ Cross connection to front axle support | B37/B38/B46/B47/B48 | M6 nut | 12 Nm | |
| 6AZ Cross connection to front axle support | B37/B38/B46/B47/B48 | M6x20 | 12 Nm | |
| 7AZ Top connection on lock support | B37/B38/B46/B47/B48 | M6x20 | 8 Nm | |
| 8AZ Lock support to spring strut dome/tension strut, vehicle battery | B37/B38/B46/B47/B48 | M8 | 19 Nm | |
| 9AZ Cross connection to adapter of front axle support | B37/B38/B46/B47/B48 | 12 Nm | ||
| 10AZ Cover on the spring strut dome/ Cover of positive battery connection point/ Partition wall engine compartment |
B37/B38/B46/B47/B48 | 3 Nm | ||
| 11AZ External radiator, front left, in wheel arch | B48 4WD | M6 | 8 Nm |
| Charge air cooler on coolant radiator | ||
| M6x12 | tightening torque | 6 Nm |