Section 18 (Automatic Transmission - Tightening Torques (F48 AWD)): Clutches
WARNING: This page is about a different variant/trim than selected.
24 23 CLUTCHES - TIGHTENING TORQUES SPECIFICATION
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Torx screws for F clutch on the transmission housing | 4HP-22/4HP-24 | M6 | 10 Nm | |
| /A5S 560Z | M8 | 23 Nm | ||
| 2AZ brake band set screw | A4S 270R/A4S 310R | 5/16 inch | 5 Nm | |
| 3AZ Counter nut for the brake band set screw | A4S 270R/A4S 310R | 5/16 inch | 21 Nm |