11 28 Drive belt, belt tensioner, and idler pulley
WARNING: This page is about a different variant/trim than selected.
11 28 DRIVE BELT WITH BELT TENSIONER AND IDLER PULLEY - TIGHTENING TORQUES SPECIFICATION
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Belt tensioner with deflection pulley to crankcase | B46M0/O0/B48M0/O0 | M10 | 30 Nm | |
| 2AZ Belt tensioner to alternator | B46M0/O0/B48M0/O0 | M8 | 22 Nm | |
| 3AZ Idler pulley to belt tensioner | B46M0/O0/B48M0/O0 | M8 | 20 Nm |