11 74 559 Replace electric valve for vacuum control of water pump (B48AO0)

Necessary preliminary tasks: 

• Remove INTAKE PLENUM 

Removal: 

Unlock and disconnect the connector (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Pull off vacuum lines (1) from electric valve (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock electric valve (1) in the marked area and pull off towards front.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Place electric valve (1) in direction of arrow on holder.

Courtesy of BMW OF NORTH AMERICA, INC.

Place vacuum hoses (1) on electric valve (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Connect the plug (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work: 

• Install INTAKE PLENUM